Ford Obd2 Software Download

Using the FORScan Lite phone app, push connect to the vehicle. You are good to go. If you are having issues connecting the device, please email our customer support at [email protected]: You CANNOT apply configurations, programming functions, and some service procedures using FORScan Lite. Use the FORScan software instead using Windows laptop, desktop computer,. FORScan is a software scanner for Ford, Mazda, Lincoln and Mercury vehicles, designed to work over ELM327 and J2534 Pass-Thru compatible adapters. There are many OBD2 scanners, but does FORScan somehow differ? Yes, because it is designed especially for Ford, Mazda, Lincoln and Mercury vehicles. OBDwiz is powerful OBD2 diagnostic software that is included free with OBDLink MX+, OBDLink SX, OBDLink LX, OBDLink EX, OBDLink MX Wi-Fi, and OBDLink MX. OBDwiz contains the same features as TouchScan but will only work with OBDLink scan tools.

Ford Obd2 Software DownloadFord obd2 software free

Ford Diagnostic software download, free

    ObdTunerPro Manual:

    Download ObdTunerPro manual V1.0.16

    ObdTunerPro PC Software:

    Download ObdTunerPro PC software V3.2.28

    Change log ObdTunerPro

    Version 3.2.28.1 (2020-08-10)

  • Added: 14point7 Spartan2 wideband controller.
  • Manual updated (2020-01-15)

  • Small changes made to fuel learning section.
  • Screen shot for crank and warm-up tuning updated.
  • Version 3.2.27.1 (2019-11-22)

  • Zeitronix wideband settings improved.
  • Version 3.2.26.1 (2019-05-15)

  • Fixed: Problem with opening mailed calibration files.
  • Version 3.2.24.1 (2019-03-08)

  • Update (patch), fixing a firmware problem with the EGR output threshold setting.
  • Version 3.2.23.1 (2019-02-01)

  • Wideband fuel learning algorithm improved.
  • Version 3.2.22.1 (2018-08-08)

  • Added: Support for STN11xx based OBD interfaces.
  • Version 3.2.21.1 (2018-05-08)

  • Added: Bosch 0 280 155 968 injectors.
  • Version 3.2.20.2 (2018-03-21)

  • Fixed: Warning when trying to used it with the wrong ECU version.
  • Added: Zeitronix Wideband sensor (under development).
  • Manual updated (2017-07-28)

  • Quick steps for uploading a calibration to the ECU modified.
  • Wiring diagram updated for connecting a water injection system.
  • Version 3.2.19.1 (2017-05-24)

  • F23 WR gearbox with end reduction 3.74 added.
  • Version 3.2.18.1 (2017-05-22)

  • Fixed: Problem with power measurement for cars using a F23 WR gearbox.
  • Fixed: Measured maximum power field always 0.

    Version 3.2.17.1 (2017-05-18)

  • F23 WR gearbox with end reduction 3.84 added.
  • F23 WR gearbox with end reduction 3.95 added.
  • Automatically set EGR input offset to -0.04V when wideband controller AEM 0300 is selected.
  • Version 3.2.16.1 (2017-05-14)

  • F23 WR gearbox added.
  • Maximum fuel pressure setting increased to 5.5 bar.
  • Version 3.2.15.1 (2017-04-23)

  • Less aggressive settings for P3501 for wideband fuel control.
  • Version 3.2.14.1 (2017-04-04)

  • Fixed: Problem with application not visible when switching between systems with different screen layouts.
  • Fixed: Problem with importing ObdTunerPro calibration to not active calibration.
  • Version 3.2.12.1 (2017-03-24)

  • Selectable boost range increased to 400kPa.
  • Fixed: Slow logging with some OBD interfaces.
  • Version 3.2.11.2 (2017-02-15)

  • PLX gen2 and gen4 wideband sensors added for testing.
  • When importing ObdTuner calibration initialize extra hardware table to 0
  • Fixed: Wrong pressure range after importing a calibration with a 15-300kPa boost range.
  • Fixed: Small difference between programmed PWM values and outputted PWM values (2%).
  • Version 3.2.10.6 (2017-01-10)

  • Initial release